FTP series wide range DC power supply is a high performance DC power supply developed by Faith Technology. It has the advantages of wide range output, large current, low ripple noise, fast transient response, high resolution, high precision, voltage and current slope can be set, etc.
FTP series product line is rich, including 36 different models, 3 kinds of power levels, voltage range from 40V to 1500V, is the best choice for ATE system integration, laboratory testing, vehicle equipment testing, superconducting testing, motor testing, battery charging simulation, voltage and current sensor calibration, laser testing and power supply, electronic product life cycle testing and other applications.
Application field
l Flexible application of multiple specifications in power electronics laboratory;
l Fuel cell, power battery, lead battery, supercapacitor test;
l Simulation of power supply environment for on-board, airborne and shipboard electronic equipment;
l DC charger, charging pile design and test system integration;
l server power supply, UPS, inverter design and test;
l Design and test for solar, wind and energy storage;
l Power supply and design testing for UAV, laser and sensor fields.
High-precision measurement function ：
FTP series programmable DC power supply has a built-in 16-bit high-precision A/D converter, with a measurement accuracy of 0.1%+0.1%F.S. voltage and 0.1%+0.2%F.S. current.FTP provides additional voltage and current monitoring output function, users can monitor the output waveform of voltage and current through oscilloscope by monitoring the output terminal.
Constant power, wide range output ：
FTP series has more than 2.4 times wide output range. The output voltage and current can be adjusted automatically within the set range to achieve constant power output. The CP function is helpful for solar photovoltaic simulation test, load stability test and protection safety test.
FTP series provides constant power rangewider operation under constant power range
Programmable sequence waveforms
Programmable sequence allows users to edit voltage and current waveforms by themselves. The FTP series provides 20 sequence files, and each file supports up to 20 running steps. You can set the output voltage, output current and delay in each step. The sequence supports the attributes of "run times" and "linked file". "Run times" can control the sequence to run cyclically, and "link files" can increase file running steps.
CV / CC priority
When the power supply is connected to the inductive or capacitive load, the output current or voltage will overrush to a certain extent. In some cases, the protection of the device under test will be triggered. In serious cases, the device under test will be damaged directly. FTP series has CV and CC output priority function to effectively suppress output overshoot and its impact
CV preferred (high speed build voltage, current overshoot)
CC priority (high speed build current, voltage overshoot)
Analog programming
FTP series power supply has two analog input ports for voltage programming and current programming, which can control the output voltage and output current respectively. The analog programming signal is a 0 ~ 5V or 0 ~ 10V DC voltage signal. The programming signal corresponds to the 0～100%F.S. output voltage and output current.
Master-slave parallel/series operation
The FTP series power supply support master-slave parallel/series operation. Parallel / series operation expands the output power of the power supply, greatly enhances the application area of the FTP power supply.
Protection against misoperation
FTP series provides voltage range setting and current range setting functions to prevent users from misoperation. During the use of the power supply, once the operator sets the limit range of voltage or current, the power supply will output according to the limit parameters to protect the equipment under test.
Feature
■ Output voltages: 0 V...40 V up to 0 V... 1500 V;
■ Output current: 0 A...3.5 A up to 0 A... 240 A;
■ Output power: 2 / 3.2 / 6.5 kW;
■ CV, CC, CP operation modes;
■ Easy Master-Slave parallel or serial;
■ Precision V & I measurement;
■ High speed programming;
■ 1ms typical transient response;
■ Programmable sequence;
■ Voltage & current slew rate control;
■ CV / CC priority;
■ Foldback protection;
■ Wide operating region for output;
■ Automotive waveform test feature, compatible with ISO16750-2, VW80000 standards *1
■ Remote sense compensation;
■ Optional analog programming & monitoring interface;
■ ±OVP, ±OCP, ±OPP, OTP, ±LVP;
■ Voltage limit, current limit;
■ Standard LAN, USB (serial), optional GPIB interface;
■ SCPI and ModBus RTU protocol;
■ TFT color LCD display.
